Gooseneck Truck Body Body For Sale

New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS BWISE Bri-Mar_DI-100 Flatbed body only, 8' long x 64 inch wide, N/A inch cab to axle, N/A inch frame rail width, Long bed Dump Insert w Cab Protector, Tarp kit, 1 pc tailgate, 2 cu yd cap, 6k GVW, 12 Gauge Steel Floor, 17 inch Fixed Sides (14 Gauge), Stake Pockets Integrated into Side Rails, Power Unit w/ 20' Remote, Power Up / Power Down, 4 inch Hydraulic Cylinder w/ Hoist, Durable Powder Coat Primer & Durable Powder Coat Finish, Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # DI-100-8. Weighs approx 770 lbs. Serial # 120169. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New Hillsboro SLT Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch, color: Black. Mfg part # 73651 LT7.0-8.5-A-56 45 Degree. Weighs approx 645 lbs. Serial # 69477. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

New Hillsboro SLT Flatbed body only, 8.5' long x 84 inch wide, 56 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch, color: Black. Mfg part # 73651 LT7.0-8.5-A-56 45 Degree. Weighs approx 645 lbs. Serial # 69476. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro SLT Flatbed body only, 8.5' long x 96 inch wide, 56 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 73671 SLT8.0-8.5-A-56. Weighs approx 810 lbs. Serial # 66610. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro SLT Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 73650 LT7.0-7.0-A-40 45 Degree. Weighs approx 575 lbs. Serial # 62794. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro SLT Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 73650 LT7.0-7.0-A-40 45 Degree. Weighs approx 575 lbs. Serial # 62793. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro SLT Flatbed body only, 8.5' long x 96 inch wide, 56 inch cab to axle, 34 inch frame rail width, 38.25 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - SLT Steel, 45 degree corners, Adjustable frame rails 34/38/42, GN hitch. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 73671 SLT8.0-8.5-A-56. Weighs approx 810 lbs. Serial # 66611. STANDARD FEATURES FOR HILLSBORO SLT SERIES:Steel truck bed with 2-year warranty,LED lights - (6) stop, turn and (4) back-up LED clearance & side marker lights,Epoxy Primer,Black polyurethane paint,Louvered headache rack with lights,14 ga. steel floor plate (7' & 7.5' wide beds),1/8 inch steel floor plate (8' & 8.5' wide beds),3 inch structural channel long sills, adjustable to 34 inch, 38 inch & 42 inch frame,Tie rail with stake pockets and rope ties,30K gooseneck ball plate with flush mount cover,Dual tag lights,Sealed wiring harness with plug in connections,B&W compatible/ ready to accept Hillsboro B&W Conversion Kit (optional). TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.

2022 Bradford Built BB-ALUM-4BOX-90-112-34 9.4 DUAL WHEEL CHASSIS - CH, Flat Bed Body Trailer, , BRADFORD BUILT 90" X 112" ALUMINUM 4 BOX UTILITY BED, LED LIGHTS, LIGHTED HEADACHE RACK, 30K RATED GOOSENECK HITCH, REAR 2-1/2" RECEIVER HITCH, 4 TOOLBOXES (ONE IN EACH CORNER), 4" FOLD DOWN SIDES, TAPERED REAR CORNERS, 60" CAB TO AXLE, 34" FRAME WIDTH, FITS CAB AND CHASSIS DUALLY TRUCK (NARROW AXLE). Please check with us for exact fitment as makes vary slightly.Aluminum, 9 x 7.50 x

2022 Bradford Built BB-WORKBED-96-136-34 11.4 DUAL WHL CHASSIS, Flat Bed Body Trailer, , BRADFORD BUILT 96" X 136" STEEL WORKBED, 34" FRAME WIDTH, 84" CAB TO AXLE, FITS CAB & CHASSIS DUALLY TRUCK (11' FRAME), GOOSENECK HITCH, 2-1/2" REAR RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, BLACK POWDERCOAT, 1/8" STEEL TREADPLATE FLOOR, 4" DROP DOWN SIDES, TAPERED REAR CORNERS.Steel, 11 x x

2024 FUTURE LINE, 8.5 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 8'6" x 84" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor - .125 Smooth Aluminum Rear Apron with LED Stop, Turn, Tail Lights - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - 3" x 3/8" Tie rail with 2" x 4" Stake Pockets on 24" Centers - For 56" CA Single Rear Wheel Truck, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2024 FUTURE LINE, 7.5 FT, Medium Duty Trucks - Truck Bodies Only - Flatbed, , , NEW Future Line 7'4" x 84" wide Aluminum Rancher Body with Chamfered Rear Corners - 1 3/4" Extruded Aluminum Floor - .125 Smooth Aluminum Rear Apron with LED Stop, Turn, Tail Lights - 30,000 lb. B&W Turnoverball Gooseneck Hitch - Tapered Bulkhead with Screen Window and Integrated STT Lights - 3" x 3/8" Tie rail with 2" x 4" Stake Pockets on 24" Centers - For 42" CA Single Rear Wheel Truck, Horse Power, Suspension, Wheels, Wheel Base, , Axle, Ratio, , VIN

2022 CM Trailers ALSK-136/94/84/34 11.4 DUAL WHEEL CHASSIS, Flat Bed Body Trailer, , NEW PICKUP FLATBED FOR TRUCK FOR SALE, CM SK MODEL ALUMINUM UTILITY BED, ALUMINUM SKIRTED FLATBED WITH 4 TOOLBOXES, RUB RAIL WITH STAKE POCKETS, LIGHTED HEADACHE RACK, LED LIGHTS, SMOOTH ALUMINUM SIDES, EXTRUDED ALUMINUM FLOOR, STEEL SUB FRAME, ALUMINUM TOOLBOXES WITH T-HANDLE LATCHES, ANGLED FUEL FILL, 94" X 136", 84" CAB TO AXLE, 34" FRAME WIDTH, THIS BED FITS A DUALLY WHEEL CAB AND CHASSIS TRUCK (11' FRAME).Aluminum, 11 x 8.00 x

2022 Bradford Built BB-WORKBED-96-136-34 11.4 DUAL WHL CHASSIS, Flat Bed Body Trailer, , BRADFORD BUILT 96" X 136" STEEL WORKBED, 34" FRAME WIDTH, 84" CAB TO AXLE, FITS CAB & CHASSIS DUALLY TRUCK (11' FRAME), GOOSENECK HITCH, 2-1/2" REAR RECEIVER HITCH, LED LIGHTS, LIGHTED HEADACHE RACK, BLACK POWDERCOAT, 1/8" STEEL TREADPLATE FLOOR, 4" DROP DOWN SIDES, TAPERED REAR CORNERS.Steel, 11 x 8.00 x