Saved

Sell

Search

Landscape Body Truck Bodys For Sale

Looking to buy a 102x40 Gn Deckover 14k landscape body? Browse our extensive inventory of new and used 102x40 Gn Deckover 14k landscape body from local dealers and private sellers. Compare prices, models, trims, options and specifications between different landscape bodies on Commercial Truck Trader.
close
38

6 102X40 GN DECKOVER 14K Truck Listings For Sale

Suggested Listings

2024 CM SK in Sycamore, IL
$7,210

New 2024 CM Flatbed Body Only

SK
Stock # 411340
New CM SK Flatbed body only, 7' long x 84 inch wide, 40 inch cab to axle, 38 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Black. Mfg part # SK-01844038. Weighs approx 937 lbs. Serial # KC00411340. Will this bed fit my truck?  This is the standard recommendation for a:Make: FordYears: 1998-2016Axle Type: Single Wheel Short BedHeadache Rack height: 45.5 inch--- OR ---Make: Ram (Dodge)Years: 2002-EarlierAxle Type: Single Wheel Short BedHeadache Rack height: 45.5 inchPlease measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM SK MODEL:- All steel frame construction- Full length skirt w rolled fenders & ATP trim- Qty 4* Toolboxes (recessed, lockable, T-handle latches, 2 on each side)   --*Some 7' beds only have a total of 2 boxes- Tread plate deck- Integrated headache rack- Welded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)- Sealed wiring harness- 7 pin plug- LED lights- Rubrail with stake pockets- Tapered corners for max turning radius- Powdercoat finish TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 SWITCH-N-GO FLATBEDS BODY in Winder, GA
$5,670

New 2024 SWITCH-N-GO Roll Off Body Only

FLATBEDS BODY
Stock # FLATBEDS
<p><strong>IN STOCK,</strong> 11FT SWITCH-N-GO DIAMOND-PLATED FLATBED, STAKE POCKETS, RUB RAIL AOUND ENTIRE BODY, (4) TIE DOWN HOOKS, OVER 100+ BODIES <strong>IN</strong> <strong>STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 5,670.00 - <strong>IN STOCK</strong></p><p>14FT - 6,494.00 -<strong> IN STOCK</strong></p><p>15FT - 7,202.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with zinc prime & powder coated finish — Body widths are 90" for the deck and 94.5" outside — Inside bulkhead heights are high visibility in 39" or 51" — Body lengths include 1' beavertail, bodies without beavertail will receive stake pockets on rear — Floors on 9' to 12' are constructed with 1/8" steel diamond plate — Floors on 13' to 15' are constructed with 3/16" steel diamond plate — Crossmembers are constructed with 3" structural channel on 16" centers — External stake pockets are constructed on 24" centers with 3/8" x 2" flat bar rub rail — Chain tie-down key holes in floor at the four corners — Beavertail bodies receive integrated steel 4" steel ground rollers or no beavertail bodies receive standard 6" steel ground rollers</p><p> </p>
Hackett Sales,Inc.
Winder, GA
2024 CM ALSK in Sycamore, IL
$9,168

New 2024 CM Flatbed Body Only

ALSK
Stock # 411344
New CM ALSK Flatbed body only, 8.5' long x 97 inch wide, 56 inch cab to axle, 42 inch frame rail width, 45.5 inch headache rack height (overall from bottom of frame rails to top of HR), 2FTB, 2RTB, 2.5" 24k rear hitch, color: Aluminum. Mfg part # ALSK-02975642. Weighs approx 741 lbs. Serial # MV00411344. Will this bed fit my truck?  This is the standard recommendation for a:Make: GM (Chevy, GMC)Years: 2000-PresentAxle Type: Dually (bed delete)Headache Rack height: 45.5 inchNote: Bed will be wider than needed but will work. Meaure to compare. **When buying a skirted (SK, ALSK, etc) or SS bed, use 94 inch width.Please measure your truck to compare & verify. Exclusions & limitations may apply. STANDARD FEATURES FOR CM ALSK MODEL:Aluminum full length skirt w rolled fenders & ATP trimSteel frame constructionQty 4* Aluminum Toolboxes (recessed, lockable, T-handle latches, 2 on each side *Some 7' beds only have a total of 2 boxes)Extruded aluminum deckIntegrated aluminum headache rackWelded in gooseneck ball & 2 inch rear bumper pull integrated hitch (unless otherwise noted)Sealed wiring harness7 pin plugLED lightsAluminum rubrail with stake pocketsTapered corners for max turning radiusPowdercoat steel chassis. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 SWITCH-N-GO DROP BOX in Winder, GA
$4,795

New 2024 SWITCH-N-GO Roll Off Body Only

DROP BOX
Stock # 12FT DUMPSTER
<p><strong>IN STOCK</strong>, 12FT SWITCH-N-GO DUMPSTER/DROP BOX, (16) YDS, SINGLE REAR DOOR, 53" SIDES, OVER 100+ BODIES <strong>IN STOCK AT ALL TIMES</strong>, WINDER, GA…</p><p>11FT - 4,595.00 -<strong> IN STOCK</strong></p><p>12FT - 4,795.00 - <strong>IN STOCK</strong></p><p>14FT - 5,295.00 - <strong>IN STOCK</strong></p><p>— Structural steel construction with powder coated finish or wet paint coating finish — Body widths are 88" inside and 96" outside — Interior side heights are 51" — Floors are constructed of 12GA steel sheet with 3" cross channel on 16" centers — Sides are constructed of 12GA steel with 2-3 posts per side and receive structural gussets between rear posts — Top rails are constructed of 3" x 3" x 1/8" square steel tubing or formed top rail — Rear corner posts are constructed of 7GA steel sheet — Tailgates are constructed of a formed 12GA steel sheet with 2" x 2" x 1/8" tubular frame work — Standard 6" steel ground rollers</p>
Hackett Sales,Inc.
Winder, GA
2024 Hillsboro GI in Sycamore, IL
$4,026

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69662
New Hillsboro GI Flatbed body only, 8.5' long x 80 inch wide, 56 inch cab to axle, 38 inch frame rail width, 40 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Ford, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76313 GLT80-102-38-56-40 F/G. Weighs approx 1065 lbs. Serial # 69662. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro GI in Sycamore, IL
$4,026

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69663
New Hillsboro GI Flatbed body only, 8.5' long x 80 inch wide, 56 inch cab to axle, 38 inch frame rail width, 40 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Ford, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76313 GLT80-102-38-56-40 F/G. Weighs approx 1065 lbs. Serial # 69663. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro GI in Sycamore, IL
$4,026

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69665
New Hillsboro GI Flatbed body only, 8.5' long x 80 inch wide, 56 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, GM/RAM, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76314 GLT80-102-42-56-36.5 F/G. Weighs approx 1065 lbs. Serial # 69665. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro GI in Sycamore, IL
$4,026

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69694
New Hillsboro GI Flatbed body only, 8.5' long x 80 inch wide, 56 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, GM/RAM, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76314 GLT80-102-42-56-36.5 F/G. Weighs approx 1065 lbs. Serial # 69694. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro GI in Sycamore, IL
$4,648

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69475
New Hillsboro GI Flatbed body only, 11.3' long x 96 inch wide, 84 inch cab to axle, 34 inch frame rail width, 40 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Chassis, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76334 GLT96-136-34-84-40. Weighs approx 1430 lbs. Serial # 69475. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2024 Hillsboro GI in Sycamore, IL
$4,648

New 2024 Hillsboro Flatbed Body Only

GI
Stock # 69474
New Hillsboro GI Flatbed body only, 11.3' long x 96 inch wide, 84 inch cab to axle, 34 inch frame rail width, 40 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Chassis, 45 degree corners, GN & BP Hitches, color: Black. Mfg part # 76334 GLT96-136-34-84-40. Weighs approx 1430 lbs. Serial # 69474. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2023 Hillsboro GI in Sycamore, IL
$3,769

New 2023 Hillsboro Flatbed Body Only

GI
Stock # 66434
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro GI Flatbed body only, 7' long x 80 inch wide, 40 inch cab to axle, 38 inch frame rail width, 40 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Ford, 45 degree corners, GN & BP Hitches. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 76310 GLT80-84-38-40-40. Weighs approx 930 lbs. Serial # 66434. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2023 Hillsboro GI in Sycamore, IL
$3,888

New 2023 Hillsboro Flatbed Body Only

GI
Stock # 66438
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro GI Flatbed body only, 8.5' long x 96 inch wide, 56 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, GM/RAM, 45 degree corners, GN & BP Hitches. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 76331 GLT96-102-42-56-36.5. Weighs approx 1165 lbs. Serial # 66438. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2023 Hillsboro GI in Sycamore, IL
$3,769

New 2023 Hillsboro Flatbed Body Only

GI
Stock # 66436
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro GI Flatbed body only, 7' long x 80 inch wide, 42 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, GM, 45 degree corners, GN & BP Hitches. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 76312 GLT80-84-42-42-36.5. Weighs approx 930 lbs. Serial # 66436. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2023 Hillsboro GII in Sycamore, IL
$3,987

New 2023 Hillsboro Flatbed Body Only

GII
Stock # 66575
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro GII Flatbed body only, 7' long x 80 inch wide, 37 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GII Steel, Ram, Fold down sides, 45 degree corners, GN & BP Hitches. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 76011 SSLT80-84-42-37-36.5. Weighs approx 930 lbs. Serial # 66575. STANDARD FEATURES FOR HILLSBORO GII SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,Inboard stake pockets,6 inch fold-down sides w/ multiple tie locations,Sides have greasable hinges, slam latch & rubber bump stop,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube,2 inch Adapter included,Board holders across front and back of bed,Automotive grade harness with plug-in connections,7 wire trailer socket. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
2023 Hillsboro GI in Sycamore, IL
$3,769

New 2023 Hillsboro Flatbed Body Only

GI
Stock # 66435
 FALL in LOVE with these COOL Savings! While supplies last; in-stock items only. NOS Hillsboro GI Flatbed body only, 7' long x 80 inch wide, 37 inch cab to axle, 42 inch frame rail width, 36.5 inch headache rack height (overall from bottom of frame rails to top of HR), HILLSBORO - GI Steel, Ram, 45 degree corners, GN & BP Hitches. Aged/Old Stock (may have minor dings & scratches, blemishes, oxidation, fading, rust streaks, etc)., color: Black. Mfg part # 76311 GLT80-84-42-37-36.5. Weighs approx 930 lbs. Serial # 66435. STANDARD FEATURES FOR HILLSBORO GI SERIES:Steel truck bed with 2 year warranty,Epoxy primer,Black polyurethane paint,Louvered headache rack w/ sealed beam lights,1/8-inch steel treadplate deck,Mounting plate with 30K GN ball & flush mount lid,5 inch structural long sills, 2 1/2 inch crossmembers,LED lights - (6) stop, turn & tail and (4) back-up, LED Clearance and side marker lights,Dual tag lights,3-inch Tie rail with stake pockets and rope ties,Rear tailboard with 18K receiver hitch with 2 1/2 inch tube (2 inch Adapter included),Lights & Harness installed. 7 wire trailer socket.Ready to accept Hillsboro B&W Conversion kit. TERMINOLOGY: Length: Measurement from the back of the cab to end of frameWidth:  Measurement from outside of rear tire to outside of rear tireCA: Measurement from the back of the cab to center of rear axleRails:  Measurement from outside of frame rail to outside of frame rail (at the rear of the frame)HR: Headache rack. Overall height from bottom of bed's frame rails to top of Headache rack.**PLEASE NOTE: CUSTOMER IS RESPONSIBLE FOR VERIFYING THE TRUCK BED WILL FIT THEIR VEHICLE PRIOR TO PURCHASE.  UNDER NO CIRCUMSTANCES MAY A BED BE RETURNED ONCE INSTALLED OR MODIFIED IN ANY WAY.**Mounting brackets, Hardware, Fuel filler necks, Wiring adapter(s), etc are NOT included with the bed and are sold separately.The vehicle's exhaust may require modification after install. This is the customer's responsibility and not included with install.For gas trucks, a grounding strap attached to the fuel fill box may be required to prevent static electricity & sparking.Installation of back-up cameras and/or rear sensors require additional time and labor. (Not included in the standard install rate)Located in Sycamore, IL 60178.Sorry, payment with credit cards are not allowed for 'Cash Price' specials.For additional information and to see our HUGE selection of inventory, go to www.rondotrailer.com or call us at 815-899-4340.
Rondo Enterprises
Sycamore, IL
Purchase In Progress
Another customer has started purchasing this motorcycle. By providing your information below, we can let you know if this motorcycle becomes available again.
Please enter a valid first name.
Please enter a valid last name.
Please enter a valid email.
Please enter a valid phone number.
By using this site, you agree to our Terms of Use & our Privacy Policy.

Top Available Cities with Inventory

Disclaimers

Commercial Truck Trader Disclaimer: The information provided for each listing is supplied by the seller and/or other third parties. CommercialTruckTrader.com is not responsible for the accuracy of the information. Please refer to the Commercial Truck Trader Terms of Use for further information.